How to prevent Rubber sponge (semi-finished product) from deteriorating during storage?
Publish Time: 2024-09-30
If Rubber sponge (semi-finished product) is not properly managed during storage, it is easy to deteriorate, affecting its subsequent processing and use. Here are some ways to prevent Rubber sponge (semi-finished product) from deteriorating.
First, choose a suitable storage environment. Rubber sponge should be stored in a dry, well-ventilated warehouse, away from direct sunlight and humid environment. Humid air will cause the rubber sponge to absorb moisture, resulting in its performance degradation and even mildew. At the same time, keep the temperature in the warehouse stable to avoid excessively high or low temperatures from causing adverse effects on the rubber sponge.
Secondly, pay attention to the packaging method. Rubber sponge (semi-finished product) should be sealed to prevent the intrusion of dust, impurities and moisture. You can use packaging materials such as plastic film and paper bags, and ensure that the packaging is well sealed. During the packaging process, you can also add substances such as desiccant to absorb moisture in the air and keep the rubber sponge dry.
Furthermore, Rubber sponge (semi-finished product) should be stacked reasonably. Avoid stacking too high to prevent the rubber sponge at the bottom from being deformed by excessive pressure. At the same time, keep the stacking neat and stable to prevent the rubber sponge from collapsing or sliding during stacking.
In addition, the storage status of the rubber sponge should be checked regularly. Check whether the packaging is intact and whether there is any damage or leakage. At the same time, check the appearance and performance of the rubber sponge, such as whether there is any discoloration, deformation, hardening, etc. If any problems are found, measures should be taken in time to deal with them.
Finally, the first-in-first-out principle should be followed. When using Rubber sponge (semi-finished product), the earlier batches should be used first to avoid deterioration caused by long-term storage.
In short, by choosing a suitable storage environment, paying attention to the packaging method, reasonable stacking, regular inspection and following the first-in-first-out principle, the deterioration of Rubber sponge (semi-finished product) during storage can be effectively prevented and its quality and performance can be guaranteed.
